El Cajon dings, creases, and hail, worked back to factory flat without disturbing the original paint.
The same craft we bring to El Cajon. Tap WATCH and the page becomes the theater, sound on.
Drag or use the arrows · tap watch for full screen
Mobile paintless dent repair in El Cajon is not a discount version of shop work. It is the same craft, brought to your driveway when the repair allows for it. The tools, the lighting, and the experience all show up at your door. What does not show up is a lower standard.
That is the value. The factory finish stays. Nothing lands on the Carfax. The car keeps its resale, and most repairs are done the same day. When a repair needs a controlled environment, it routes to our Escondido shop. The decision stays yours.
Parking-lot dings and small body dents, massaged out clean.
See moreBody-line creases brought back along the whole length, no repaint.
See moreDeep panel damage worked back in stages, factory paint kept.
See moreMulti-panel hail, priced by the storm rather than the dent.
See moreDents and door dings on any electric car.
See moreMost dents in El Cajon land between $197 and $500. A standard door ding runs $197 to $250, a medium dent $275 to $500, and a body-line crease $225 to $600 or more. Large or complex damage starts at $500, and hail is priced by the storm from $1,500. Nothing here is a teaser rate. It is what the work costs.
The panel matters more than most people expect. The same size dent prices differently on a door than on a quarter panel, because access behind the metal is part of the job. Here is the honest breakdown, panel by panel.
| Panel | Price Range | Time | What Sets the Price |
|---|---|---|---|
| Door | $197 to $500 | 60 minutes to 2 hours | The most common panel we repair, because it is the one shopping carts and other car doors reach. Most doors have working access behind the skin, which is why a door ding stays at the bottom of the range.A ding on a door body line runs higher than the same size ding in the flat middle of the panel. |
| Hood | $250 to $900 | 90 minutes to 4 hours | Large, flat, and the most reflective panel on the car, so a hood hides nothing. Hoods are also aluminum on a growing number of vehicles, and aluminum takes far more force and accuracy to move.Underhood bracing decides a lot of the price. Some hoods open up to clean access, others have insulation and structure in the way. |
| Fender | $225 to $700 | 90 minutes to 3 hours | Fenders curve hard and sit right next to a body line, so the metal is under more tension than a flat door. Access often means removing the liner or the light.Fender edges near the wheel arch are the hardest area on the panel and price accordingly. |
| Quarter Panel | $275 to $1,200 | 2 to 5 hours | A quarter panel is welded to the car, not bolted on, so a body shop cannot unbolt and replace it. That is exactly why PDR is worth the most here. Access usually means going in through the trunk or removing interior trim.This is the panel where a body shop quote and a PDR quote differ the most. |
| Roof | $300 to $1,500 | 2 to 6 hours | Reached from inside, through the headliner area, so part of the labor is careful access rather than the dent itself. Roof damage is usually hail or something that fell.Roofs with sunroofs, sensors, or fixed glass narrow the working access and raise the number. |
| Trunk or Tailgate | $250 to $900 | 90 minutes to 4 hours | Horizontal like a hood, so it collects hail and falling objects. Trunk lids often have bracing directly behind the impact area, which changes the approach.Tailgates on trucks and SUVs are usually easier access than a car trunk lid. |
| Bumper | $250 to $750 | 2 to 4 hours | A bumper is plastic, not metal, so it is a different repair entirely. Plastic has memory and can often be reshaped, but scuffs and scrapes through the paint need refinishing to the factory color code.A corner scuff starts around $250. A full scuff panel runs $395, a deeper scratch $550, and an oversized or two-tone bumper up to $750. |
| Scratch, Any Panel | $250 to $750 | 2 to 4 hours | Priced by depth, not by length. A scratch you cannot catch a fingernail in usually polishes out. One that catches has broken the clear coat and needs to be leveled and refinished to your factory paint code.The fingernail test is the honest first answer, and it costs you nothing to do it yourself before sending photos. |
Send two photos and skip the guessing. Straight-on and at a 45-degree angle so the light rakes across the panel. A technician replies with your actual range, usually within minutes. Text 858-408-6200 or read the full pricing breakdown.
El Cajon dings, creases, and hail, worked back to factory flat without disturbing the original paint. El Cajon sits where the 8 meets the 67, which means highway miles and a lot of trucks. Parkway Plaza is one of the larger retail lots in the county, and the surrounding area runs work vehicles and trailers daily. Out here the damage is more often something that hit the car than something the car was parked next to. Hoods and roofs from road debris, plus truck panels.
Panel material decides the repair more than the badge does. Aluminum has no memory, so it gives nothing back and every correction takes more force and more accuracy than the same dent in steel. That is not only a Tesla and Rivian story any more. Ford has built the F-150 body in aluminum since 2015, and Toyota, BMW, Mercedes-Benz, and others use it on hoods and tailgates across their ranges.
Steel panels and the most routine work on the board.
Increasingly common on the commute here. Aluminum panels and a different repair from steel.
Truck country. The aluminum-bodied F-150 is the one most commonly misquoted by other shops.
The most common vehicles on the road out here, and aluminum on newer hoods and tailgates.
Not on the list? We repair every make and model, including trucks, vans, and classics. See EV and Tesla dent repair, aluminum dent repair, or motorcycle gas tank repair.
El Cajon sits where the 8 meets the 67, which means highway miles and a lot of trucks. Parkway Plaza is one of the larger retail lots in the county, and the surrounding area runs work vehicles and trailers daily. Out here the damage is more often something that hit the car than something the car was parked next to.
Panels we see most in El Cajon: Hoods and roofs from road debris, plus truck panels.
It hits horizontal surfaces at speed. Hoods and roofs take the worst of it, and the dents are small, sharp, and often in clusters rather than one big impact.
Sharp is the operative word. A rock at freeway speed concentrates all its force into a point the size of a fingertip, which stretches the paint tighter than any door strike does. Those are worked slowly from behind the panel and finished by tapping the high spot flat, checked against a reflection board until the line runs clean. Rushing that step is how paint cracks.
Hoods bring a second consideration. On a growing number of vehicles the hood is aluminum, and aluminum has no memory. Steel wants to spring back toward its original shape and a technician can use that. Aluminum gives nothing back, so every correction takes more force and more accuracy at once. That is not only a Tesla and Rivian story. Ford has built the F-150 body in aluminum since 2015, and Toyota, BMW, and Mercedes-Benz use it on hoods and tailgates across their ranges. A hood runs $250 to $900 and the metal is a bigger factor in that spread than the size of the dent.
Debris damage is also the easiest to under-repair, because a hood is the flattest and most reflective panel on the car. It hides nothing. A hood called finished too early looks fine head-on and shows every impact the moment the light rakes across it.
Mobile or shop for El Cajon: Single impacts are mobile work. A hood with a cluster of hits usually belongs at the Escondido shop, where the lighting is controlled and every impact can be checked against a board.
Send a straight-on shot and one at 45 degrees. A technician replies with your actual range, not a starting-at number designed to get us in your driveway.
A bumper is plastic and a scratch is a paint repair, so neither one is paintless dent repair. Both are real services we bring to your location in El Cajon. Mobile bumper repair starts at $250 for a corner scuff, $395 for a full scuff panel, and $550 for a deeper scratch. Panel scratch repair runs $250 to $750 depending on how deep it cuts.
$250 to $750
Scuffs, scrapes, and curb rash sanded, filled where needed, and refinished to your factory paint code. Done in your driveway in most cases.
$250 to $750
Run a fingernail across it first. If it does not catch, it usually polishes out. If it catches, the clear coat is broken and the area gets leveled and refinished.
Real Dent Time repairs from El Cajon and across East County. No cuts, no sped-up footage, no color grading. Drag to browse.
Mobile across El Cajon and all of East County. In-shop work at 2120 W. Mission Rd #240, Escondido.
Most dents in El Cajon land between $197 and $500. A standard door ding runs $197 to $250, a medium dent $275 to $500, and a crease $225 to $600 or more. Larger or complex damage starts at $500, and hail is priced by the storm from $1,500. By panel, a door runs $197 to $500, a hood $250 to $900, and a quarter panel $275 to $1,200. The exact number depends on depth, location on the panel, access behind it, and whether the panel is steel or aluminum. Text a photo to 858-408-6200 for a real figure in minutes.
Yes. We bring mobile paintless dent repair to homes and offices throughout El Cajon, and most everyday dents are finished on site in 60 minutes to 2 hours. Repairs that need controlled lighting or heavy access route to our Escondido shop, and we tell you which one your dent needs before anything is booked.
Most repairs take 60 minutes to 2 hours. A door ding is often under an hour, a crease or body-line dent runs 2 to 3 hours, and large or complex damage takes half a day to a full day. Hail is the exception at one to four days, because there is no way to shortcut hundreds of individual impacts.
Yes, and they are separate services from dent repair because a bumper is plastic and a scratch is a paint repair. Mobile bumper repair starts at $250 for a corner scuff, $395 for a full scuff panel, and $550 for a deeper scratch. Panel scratch repair runs $250 to $750 depending on depth. Both are done at your location in El Cajon in most cases.
That depends on whether the paint is actually broken. Run a fingernail across it. If it does not catch, the paint is intact and it is a straight paintless repair from $197. If it catches, the clear coat is broken, and the metal can still be shaped but the finish needs refinishing to your factory paint code, which typically adds $250 to $750 depending on the size of the area. We tell you which one you have from the photos, before you commit to anything.
Yes, and the reason is resale rather than price. PDR keeps the paint your car left the factory with, adds nothing to the Carfax, and is usually finished the same day. A body shop sands, fills, and repaints the panel, which shows up in the vehicle history and gets discounted at trade-in. PDR is not the cheap option. It is the one that keeps the car the way it was built.
There are real ones and we will name them. PDR needs the factory paint intact, so if the impact cracked or chipped the clear coat, the metal can still be shaped but the paint needs its own plan. Very sharp, very deep damage where the metal has stretched will improve dramatically but may not vanish completely, and an honest technician tells you that before starting. Panels with no working access behind them need parts removed, which adds labor. What PDR does not do is add filler, add paint, or add a line to your vehicle history.
Send a few photos any time, day or night. The line is always open and you always get a reply, with a real price range back within minutes during the day. You approve the number before any tool touches the car.
More on the work: paintless dent repair, PDR insurance claims, aluminum panels, all service areas.