La Jolla luxury and EV owners get aluminum-capable, factory-finish repair at the curb or in the shop, resale protected.
The same craft we bring to La Jolla. Tap WATCH and the page becomes the theater, sound on.
Drag or use the arrows · tap watch for full screen
Mobile paintless dent repair in La Jolla is not a discount version of shop work. It is the same craft, brought to your driveway when the repair allows for it. The tools, the lighting, and the experience all show up at your door. What does not show up is a lower standard.
That is the value. The factory finish stays. Nothing lands on the Carfax. The car keeps its resale, and most repairs are done the same day. When a repair needs a controlled environment, it routes to our Escondido shop. The decision stays yours.
Parking-lot dings and small body dents, massaged out clean.
See moreBody-line creases brought back along the whole length, no repaint.
See moreDeep panel damage worked back in stages, factory paint kept.
See moreMulti-panel hail, priced by the storm rather than the dent.
See moreDents and door dings on any electric car.
See moreMost dents in La Jolla land between $197 and $500. A standard door ding runs $197 to $250, a medium dent $275 to $500, and a body-line crease $225 to $600 or more. Large or complex damage starts at $500, and hail is priced by the storm from $1,500. Nothing here is a teaser rate. It is what the work costs.
The panel matters more than most people expect. The same size dent prices differently on a door than on a quarter panel, because access behind the metal is part of the job. Here is the honest breakdown, panel by panel.
| Panel | Price Range | Time | What Sets the Price |
|---|---|---|---|
| Door | $197 to $500 | 60 minutes to 2 hours | The most common panel we repair, because it is the one shopping carts and other car doors reach. Most doors have working access behind the skin, which is why a door ding stays at the bottom of the range.A ding on a door body line runs higher than the same size ding in the flat middle of the panel. |
| Hood | $250 to $900 | 90 minutes to 4 hours | Large, flat, and the most reflective panel on the car, so a hood hides nothing. Hoods are also aluminum on a growing number of vehicles, and aluminum takes far more force and accuracy to move.Underhood bracing decides a lot of the price. Some hoods open up to clean access, others have insulation and structure in the way. |
| Fender | $225 to $700 | 90 minutes to 3 hours | Fenders curve hard and sit right next to a body line, so the metal is under more tension than a flat door. Access often means removing the liner or the light.Fender edges near the wheel arch are the hardest area on the panel and price accordingly. |
| Quarter Panel | $275 to $1,200 | 2 to 5 hours | A quarter panel is welded to the car, not bolted on, so a body shop cannot unbolt and replace it. That is exactly why PDR is worth the most here. Access usually means going in through the trunk or removing interior trim.This is the panel where a body shop quote and a PDR quote differ the most. |
| Roof | $300 to $1,500 | 2 to 6 hours | Reached from inside, through the headliner area, so part of the labor is careful access rather than the dent itself. Roof damage is usually hail or something that fell.Roofs with sunroofs, sensors, or fixed glass narrow the working access and raise the number. |
| Trunk or Tailgate | $250 to $900 | 90 minutes to 4 hours | Horizontal like a hood, so it collects hail and falling objects. Trunk lids often have bracing directly behind the impact area, which changes the approach.Tailgates on trucks and SUVs are usually easier access than a car trunk lid. |
| Bumper | $250 to $750 | 2 to 4 hours | A bumper is plastic, not metal, so it is a different repair entirely. Plastic has memory and can often be reshaped, but scuffs and scrapes through the paint need refinishing to the factory color code.A corner scuff starts around $250. A full scuff panel runs $395, a deeper scratch $550, and an oversized or two-tone bumper up to $750. |
| Scratch, Any Panel | $250 to $750 | 2 to 4 hours | Priced by depth, not by length. A scratch you cannot catch a fingernail in usually polishes out. One that catches has broken the clear coat and needs to be leveled and refinished to your factory paint code.The fingernail test is the honest first answer, and it costs you nothing to do it yourself before sending photos. |
Send two photos and skip the guessing. Straight-on and at a 45-degree angle so the light rakes across the panel. A technician replies with your actual range, usually within minutes. Text 858-408-6200 or read the full pricing breakdown.
La Jolla luxury and EV owners get aluminum-capable, factory-finish repair at the curb or in the shop, resale protected. La Jolla is the hardest parking in the county for keeping a panel clean. Prospect Street and Girard Avenue are tight angled parking, the Cove lots fill and stay full, underground garages are narrow with concrete columns, and valet moves cars in spaces they were not designed for. UCSD adds thousands of student cars on the north end. Doors, front corners from columns, and quarter panels.
Panel material decides the repair more than the badge does. Aluminum has no memory, so it gives nothing back and every correction takes more force and more accuracy than the same dent in steel. That is not only a Tesla and Rivian story any more. Ford has built the F-150 body in aluminum since 2015, and Toyota, BMW, Mercedes-Benz, and others use it on hoods and tailgates across their ranges.
Everyday coastal commuters. Aluminum on newer hoods and hatches.
Soft, wide panels that show a ding from across a parking lot in the right light.
The single most common make we see here. Aluminum panels, and the door skins are thin.
Aluminum and high-strength steel. The vehicles where keeping the factory finish matters most to resale.
Not on the list? We repair every make and model, including trucks, vans, and classics. See EV and Tesla dent repair, aluminum dent repair, or motorcycle gas tank repair.
La Jolla is the hardest parking in the county for keeping a panel clean. Prospect Street and Girard Avenue are tight angled parking, the Cove lots fill and stay full, underground garages are narrow with concrete columns, and valet moves cars in spaces they were not designed for. UCSD adds thousands of student cars on the north end.
Panels we see most in La Jolla: Doors, front corners from columns, and quarter panels.
Because you do not hit the flat of a panel in a structure. You catch an edge. Concrete columns, tight ramps, and low beams take front corners, rear corners, door edges, and mirrors rather than the broad middle of a door.
Edge damage is its own category. A corner has crowned metal, meaning it curves in two directions at once, and crowned metal fights back harder than a flat panel. There is also far less room to work behind it, because that is exactly where the structure, the light housing, and the liner all sit. Access is often the biggest part of the labor, and it is why an honest quote sometimes includes removing a part before the repair even starts.
The other thing structures produce is contact that broke the paint rather than only bending the metal. Concrete is abrasive. If the panel scraped, you may be looking at a paint repair rather than a paintless one, and those are two different jobs at two different prices. Run a fingernail across it. If it does not catch, the paint held and it is a paintless repair. If it catches, the clear coat is broken and the area needs refinishing to your factory paint code.
Corner damage is where a shortcut does the most harm. Drilling an access hole is faster for the technician and permanent for your car. So is prying against a crowded edge and stretching the metal. Neither shows up the day of the repair. Both show up later, in a reflection or at trade-in.
Mobile or shop for La Jolla: Most edge and corner work is mobile. If a light or liner has to come out for access, we tell you that in the quote rather than discovering it in your driveway.
Send a straight-on shot and one at 45 degrees. A technician replies with your actual range, not a starting-at number designed to get us in your driveway.
A bumper is plastic and a scratch is a paint repair, so neither one is paintless dent repair. Both are real services we bring to your location in La Jolla. Mobile bumper repair starts at $250 for a corner scuff, $395 for a full scuff panel, and $550 for a deeper scratch. Panel scratch repair runs $250 to $750 depending on how deep it cuts.
$250 to $750
Scuffs, scrapes, and curb rash sanded, filled where needed, and refinished to your factory paint code. Done in your driveway in most cases.
$250 to $750
Run a fingernail across it first. If it does not catch, it usually polishes out. If it catches, the clear coat is broken and the area gets leveled and refinished.
Real Dent Time repairs from La Jolla and across Coastal San Diego. No cuts, no sped-up footage, no color grading. Drag to browse.
Mobile across La Jolla and all of Coastal San Diego. In-shop work at 2120 W. Mission Rd #240, Escondido.
Most dents in La Jolla land between $197 and $500. A standard door ding runs $197 to $250, a medium dent $275 to $500, and a crease $225 to $600 or more. Larger or complex damage starts at $500, and hail is priced by the storm from $1,500. By panel, a door runs $197 to $500, a hood $250 to $900, and a quarter panel $275 to $1,200. The exact number depends on depth, location on the panel, access behind it, and whether the panel is steel or aluminum. Text a photo to 858-408-6200 for a real figure in minutes.
Yes. We bring mobile paintless dent repair to homes and offices throughout La Jolla, and most everyday dents are finished on site in 60 minutes to 2 hours. Repairs that need controlled lighting or heavy access route to our Escondido shop, and we tell you which one your dent needs before anything is booked.
Most repairs take 60 minutes to 2 hours. A door ding is often under an hour, a crease or body-line dent runs 2 to 3 hours, and large or complex damage takes half a day to a full day. Hail is the exception at one to four days, because there is no way to shortcut hundreds of individual impacts.
Yes, and they are separate services from dent repair because a bumper is plastic and a scratch is a paint repair. Mobile bumper repair starts at $250 for a corner scuff, $395 for a full scuff panel, and $550 for a deeper scratch. Panel scratch repair runs $250 to $750 depending on depth. Both are done at your location in La Jolla in most cases.
Yes, and the reason is resale rather than price. PDR keeps the paint your car left the factory with, adds nothing to the Carfax, and is usually finished the same day. A body shop sands, fills, and repaints the panel, which shows up in the vehicle history and gets discounted at trade-in. PDR is not the cheap option. It is the one that keeps the car the way it was built.
The shop is open Monday to Friday 8:30am to 4pm, with Saturday by appointment. Photo estimates run around the clock. Send a photo any time, day or night, and you get a real range back, usually within minutes during business hours and first thing the next morning otherwise.
Yes, and the reason is resale rather than price. PDR keeps the paint your car left the factory with, adds nothing to the Carfax, and is usually finished the same day. A body shop sands, fills, and repaints the panel, which shows up in the vehicle history and gets discounted at trade-in. PDR is not the cheap option. It is the one that keeps the car the way it was built.
Send a few photos any time, day or night. The line is always open and you always get a reply, with a real price range back within minutes during the day. You approve the number before any tool touches the car.
More on the work: how paintless dent repair works, when a claim is worth filing, aluminum dent repair, everywhere we cover.